Screwplug Heaters Type CX Heaters with 1″ and 1 1/4″ Plugs

Contact us to get your personalized offer

Technical Data

Sesco SKU:tp-119 Category: Tag: Brand:

Available on backorder

Description

Type CXC heaters are used primarily for water heating and have brass screwplugs and copper sheaths.
Type CXF are used primarily for oil heating and have steel screwplugs. Low watt density heaters are used in heavier, non-circulated oils. Higher watt density heaters are suitable for light oils or in forced oil circulation loops. Incoloy elements are silver brazed into a steel screwplug.

 

Built-in Thermostats

Standard built-in thermostat is a one pole device limited to 240V 25 amp. Whenever the heater voltage exceeds 240V or the heater current exceeds 25 amps or for threephase supply, the thermostat is intended for pilot duty only and is not factory wired to the elements. You may uinquire contactor and control transformer you may require in these instances.

1″ NPT SCREWPLUG HEATERS (THREE ELEMENTS)
KWWithout Thermostat
Catalog Number
With Thermostat 10-120C
Catalog Number
HIGH DENSITY – COPPER SHEATH (BRASS PLUG)
0.5CXC105P1CXCT105P1
0.75CXC107P1CXCT107P1
1.0CXC110P1CXCT110P1
1.5CXC115P1CXCT115P1
2.0CXC120P1CXCT120P1
3.0CXC130P1CXCT130P1
5.0CXC150P1CXCT150P1
MEDIUM DENSITY – INCOLOY SHEATH / STEEL PLUG
0.3CXF103P1CXFT103P1
0.5CXF105P1CXFT105P1
0.7CXF107P1CXFT107P1
0.9CXF109P1CXFT109P1
LOW DENSITY – INCOLOY SHEATH / STEEL PLUG
3.0CXF102P1CXFT102P1
4.5CXF104P1CXFT104P1
6.0CXF106P1CXFT106P1
1 1/4″ NPT SCREWPLUG HEATERS (TWO ELEMENTS)
HIGH DENSITY – COPPER SHEATH (BRASS PLUG)
1.5CXI345P2539CXIT345P2539
2.0CXI360P2547CXIT360P2547
MEDIUM DENSITY – INCOLOY SHEATH / STEEL PLUG
1.0CXF210P12CXFT210P12
2.0CXF220P12CXFT220P12
LOW DENSITY – INCOLOY SHEATH / STEEL PLUG
0.6CXF206P12CXFT206P12
1.2CXF212P12CXFT212P12

TO ORDER SPECIFY: Quantity, catalog number, voltage, wattage and special features.

Download brochure above for details.