Peter Paul Submersible Valve Model 22

Contact us to get your personalized offer

The submersible valves are watertight and corrosion resistant for direct deep sea Ocean submersion.

  • Depths to ~1000 feet
  • Nickel plated Brass Body
  • Plastic Epoxy Coil & housing.
  • Media pressures up to 5000 PSI
  • Wide range of orifice sizes from 1/32″ to 5/16″.
  • Engineered to aid with environmental causes.

Available on backorder

Description

MAX. OPER.
PRESS. DIFF.
ORIFICE SIZECV FACTOR1/4 NPT PORTS1/4 NPT PORTS
DCSTANDARD COILLATCHING COIL
TBD1/32.02422G6D#W-22G6L#W-
2503/64.05222H6D#W-22H6L#W-
2001/16.09522J6D#W-22J6L#W-
1253/32.15622K6D#W-22K6L#W-
1001/8.28422N6D#W-22N6L#W-
505/32.40422O6D#W-22O6L#W-
253/16.50022P6D#W-22P6L#W-
51/4.70022R6D#W-22R6L#W-
✩: Body Style: Replace  with desired code – D = Standard Body or G = SAE Gauge Port Option
#: Replace # with desired code – 3 = 3 wire TE IL-3-MP Cable    8 = 8 wire TE IL-8-MP Cable
△ Seal Material:  Replace ∆ with desired code  –  Blank = Nitrile (Buna)      S = Low Temp Buna.      N = FKM*      E = Neoprene    A = EPDM
* FKM seals not recommended for pressure ratings above 500 PSI.

Operating Conditions:

  • Media: Air, water, and other fluids are compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require other seal materials. (Series 20 pressure ratings may change due to the viscosity of the liquid.)*
  • Valve Temperature Range:
    • Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media.
    • Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*
  • Maximum Operating Pressure Differentials: See table above.
  • Burst Pressure: 10,000 PSI
  • Leakage: Bubbletight (with polymer sealing pins)
  • Submersible Depth:  1000+ meters

 

Electrical Characteristics:

  • Coil Voltage: 9/DC, 12/DC, 18/DC & 24/DC
  • Nominal Power: 14 Watts
  • Coil Construction: Plastic Epoxy Coil & Housing, Momentary Latching Coil Available
  • Typical Response Time on Air: Approximate 50 millisecond pulse to energize and de-energize.
  • Operating Speed:  Up to 600 CPM

 

Mechanical Characteristics

  • Body: Nickel Plated Brass
  • Internal Components: Stainless Steel
  • Elastomers: Nitrile (Buna) (Std.). Many other elastomers available.*
  • Orifice Diameter: See table above
  • Porting: 1/4″ NPT. Optional SAE Gauge Port available
  • Life Expectancy: Millions of cycles, depending on application, lubrication, etc.
  • Valve Weight:1.13 lb
  • Options: Consult us.

* Consult us for options and specifications

Additional information

Weight1.5 kg
Type

Orifice/Port Size

1/4" NPT

Pressure

0 – 500 PSI

Flow

.024 – 1.0 CV