Peter Paul Magnetic Latching Valve Model MLVH22 (3-wire)

When the valve coil is energized, the plunger is drawn towards the sleeve end stop. The plunger is allowed to accelerate freely for a short distance before it makes contact with the shoulder of the sealing pin. Upon contact it imparts considerable force on the pin causing it to lift the seat. A return spring provides the return force, directly on the pin, to seal the orifice when the coil is enlarged with reverse polarity. The valve is for use on air and other non-corrosive gases, water and oil.

Common Black wire set to Neutral (-)
1. Pulse Yellow lead to Positive (+) to latch
2. Pulse Blue lead to Positive (+) to un-latch
Common Black wire set to Positive (+)
1. Pulse Yellow lead to Neutral (-) to un-latch
2. Pulse Blue lead to Neutral (-) to latch

Attachments

Available on backorder

Request quotation and delivery time

Description
Additional information

GAS PRESSURE RATINGS	ORIFICE SIZE	CV FACTOR	VALVE NUMBER
DC			DIN COIL		LEADED COIL
			1/8″ NPT PORTS	1/4″ NPT PORTS	1/8″ NPT PORTS	1/4″ NPT PORTS
750	.025	.010	H22M7DELM	H22M9DELM	H22M7DGLM	H22M9DGLM

* FKM seals not recommended for pressure above 500 psi.

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. for examples: valve (H22J7DELM 24/DC) repair pack (KH223D LM)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (OH22JDDELM 24/DC)

Operating Conditions:

Media: Air and other non-corrosive gasses, water and oil.
Valve Temperature Range:
- Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media.
- Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*
Maximum Operating Pressure Differentials: See table above.
Burst Pressure: 10,000 PSI
Leakage: Bubbletight (with polymer sealing pins)
Vacuum: To 5 Microns*

Electrical Characteristics:

Coil Voltage: 12, 24/DC
Nominal Power: DC — 10.0 Watts
Coil Construction: Molded (Std.), Non-molded Class A and Potted Class F or Class H (Opt.)
Typical Response Time on Air: Approximate 50 millisecond pulse to energize and de-energize.
Operating Speed: Up to 600 CPM

Mechanical Characteristics

Body: Stainless Steel (Std.)
Internal Components: Stainless Steel
Elastomers: Nitrile (Buna) standard. FKM, EPDM, Neoprene and Low Temp Nitrile (Buna) are available.*
Sealing Pin: Kel-F (Std.)
Orifice Diameter: See table above
Porting: 1/8″ and 1/4″ NPT (other ports avaialble).
Housing: Grommet and 1/2″ NPT conduit – many options available.*
Mounting: Must be mounted within 30° of vertical.
Life Expectancy: Millions of cycles, depending on application, lubrication, etc.
Valve Weight:1.13 lbs
Repair Packs: See table above.
Options: Alternate Port Locations, Alternate Elastomers, Alternate Sealing Pin Materials