Peter Paul Magnetic Latching Valve Model MLV 24

PeterPaul dual orifice valves feature a design where the body orifice is closed and the sleeve orifice is open when the valve is de-energized, ensuring no flow between the inlet and cylinder ports while allowing flow from the cylinder to the exhaust ports. These valves are commonly employed in remote areas lacking continuous power or with battery-powered portable equipment where power capacity is limited. They are also beneficial in applications where avoiding coil heating from continuous power application is crucial. These valves accommodate air and other fluids compatible with standard Buna seals. However, media such as hot water, steam, gasoline, oils, certain hydraulic fluids, and other aggressive substances may necessitate specialized seal materials for optimal performance and longevity.

Valve is magnetic latching.
Meets today’s demand for economy of space.
Uses power only during latching and un-latching.
Great for medical and chemical analyzers.

Attachments

Available on backorder

Request quotation and delivery time

Description
Additional information

MAX OPER PRESS. DIFF	ORIFICE SIZE		CV FACTOR		VALVE NUMBER
DC	INLET	EXH	INLET	EXH	DIN COIL		LEADED COIL
					1/8″ NPT PORTS	1/4″ NPT PORTS	1/8″ NPT PORTS	1/4″ NPT PORTS
400	1/32	1/32	.024	.024	24GG7XELM	24GG9ZELM	24GG7xGLM	24GG9ZGLM
150	3/64	1/16	.052	.095	24HJ7XELM	24HJ9ZELM	24HJ7XGLM	24HJ9ZGLM
100	1/16	1/16	.095	.095	24JJ7XELM	24JJ9ZELM	24JJ7XGLM	24JJ9ZGLM
100	1/16	3/32	.095	.156	24JK7XELM	24JK9ZELM	24JK7XGLM	24JK9ZGLM
100	1/16	1/8	.095	.214	24JN7XELM	24JN9ZELM	24JN7XGLM	24JN9ZGLM
75	3/32	1/8	.156	.214	24KN7XELM	24KN9ZELM	24KN7XGLM	24KN9ZGLM

Operating Conditions:

Media: Air and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, oils, some hydraulic fluids, and many other media require special seal materials. (Series 20 pressure ratings may change due to the viscosity of the liquid.)*
Valve Temperature Range:
- Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media.
- Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*
Maximum Operating Pressure Differentials: See table above.
Burst Pressure: 5,000 PSI
Leakage: Bubbletight (with polymer sealing pins)
Vacuum: To 5 Microns*

Electrical Characteristics:

Coil Voltage: 12, 24/DC
Nominal Power: DC — 10.0 Watts
Coil Construction: Molded Class B with DIN 43650 Form A Connector (Std.), Leadwires (Opt.) For your convenience we have the female DIN style mating connector No. 20-198** available for an additional fee.*
Typical Response Time on Air: Approximate 50 millisecond pulse to energize and de-energize.
Operating Speed: Up to 600 CPM

Mechanical Characteristics

Body: Stainless Steel (Std.) or Brass (Opt.)
Internal Components: Stainless Steel
Elastomers: Nitrile (Buna) standard. FKM, EPDM, Neoprene and Low Temp Nitrile (Buna) are available.*
Orifice Diameter: See table above
Porting: Standard 1/8” and 1/4” NPT (other ports available).*
Life Expectancy: Millions of cycles, depending on application, lubrication, etc.
Valve Weight: 1.2 lb average
Repair Packs: See table above.
Options: Alternate Port Locations, Metering and Alternate Elastomers*