Peter Paul High Pressure Valve Model H24

Contact us to get your personalized offer

This PeterPaul dual orifice valve features a design where the body orifice is closed and the sleeve orifice is open in the de-energized position. This configuration prevents flow between the exhaust and cylinder ports, but allows flow between the inlet and cylinder ports. Using the core design of the highly successful model H22, this PeterPaul vlave provides the same media control as a three-way normally open valve but at much higher pressure ratings than previously available. The pressure applied to the “IN” port must always be equal to or greater than the pressure in the “CYL” port. These valves are suitable for use with air, other non-corrosive gases, water, and oil.

  • Made for higher pressure ratings.
  • Precision stainless steel plunger.
  • Kel-F pin and elastomeric sealing elements.
  • Orifice guides the sealing pin for near perfect alignment.
  • Simple construction…only three moving parts.

Available on backorder

Description

MAX OPERATING PRESS. DIFF.ORIFICE SIZECV FACTORVALVE NUMBER
DCINLETEXHINLETEXHGROMMET HOUSINGCONDUIT HOUSING
1/8″ NPT PORTS1/4″ NPT PORTS1/8″ NPT PORTS1/4″ NPT PORTS
1000*0.6 mm1/32.010.022H24MG7XGMH24MG9ZGMH24MG7XCMH24MG9ZCM

* FKM seals not recommended for pressure above 500 psi.
Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. for examples: valve (H24MG7XGM 120/60) repair pack (KH24MGX AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (OH24MGDDGM 120/60)

 

Operating Conditions:

  • Media: Air and other non-corrosive gases, water and oil.
  • Filtration: Down to 60 microns or less is recommended.
  • Valve Temperature Range:
    • Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media
    • Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*
  • Maximum Operating Pressure Differentials: See table above.
  • Burst Pressure: 10,000 PSI
  • Leakage: Bubbletight (with polymer sealing pins)

 

Electrical Characteristics:

  • Coil Voltage: 6, 12, 24, 125/DC
  • Nominal Power: DC — 9.5 Watts
  • Coil Construction: Molded Class F (Std.), Potted and Class H Option
  • Typical Response Time on Air:  4 – 16 Milliseconds
  • Operating Speed:  Up to 600 CPM
  • Duty Cycle:  Continuous

 

Mechanical Characteristics

  • Body: Stainless Steel (Std.)
  • Internal Components: Stainless Steel
  • Elastomers: Nitrile (Buna) (Std.). Many other elastomers available.*
  • Sealing Pin: Kel-F (Std.)
  • Orifice Diameter: See table above.
  • Porting: 1/8″ and 1/4″ NPT (other ports available).*
  • Housing: Grommet and 1/2″ NPT conduit – many options available.
  • Mounting: Must be mounted within 30° of vertical.
  • Life Expectancy: Millions of cycles, depending on application, lubrication, etc.
  • Valve Weight: 1.17 lbs
  • Repair Packs: See table above.
  • Options: Alternate Port Locations, Alternate Elastomers, Alternate Sealing Pin Materials, Spade Terminal Coil, and European Style DIN Coil*

* Consult us for options and specifications

Additional information

Weight1.5 kg
Type

Orifice/Port Size

1/8" or 1/4" NPT

Pressure

0 – 1000 PSI

Flow

0.024 CV