Peter Paul High Pressure Valve Model H23

PeterPaul dual operator valves provide the same media control as a three-way normally closed single operator valve but at much higher pressure ratings. PeterPaul’s model H23 features a dual operator valve that offers this enhanced media control capability. To function as a three-way normally closed valve, the operators must be alternately energized and de-energized. The pressure applied to the “IN” port must always be equal to or greater than the pressure in the “CYL” port. Suitable for use with air, other non-corrosive gases, water, and oil.

Made for higher pressure ratings.
Precision stainless steel, free floating plunger.
Kel-F pin sealing element.
Orifice guides the sealing pin for near perfect alignment.

Attachments

Available on backorder

Request quotation and delivery time

Description
Additional information

GAS PRESSURE RATINGS		ORIFICE SIZE	CV FACTOR	VALVE NUMBER
AC	DC			1/4 NPT PORTS
3000*	3000*	1/32	.022	H23GG19DCM
2500*	1500*	3/64	.041	H23HH19DCMG
1750*	500	1/16	.065	H23JJ19DCMG
650*	100	3/32	.100	H23KK19DCMG

LIQUID PRESSURE RATINGS		ORIFICE SIZE	CV FACTOR	VALVE NUMBER
AC	DC			1/4 NPT PORTS
3000*	3000*	1/32	.022	H23GG19DCM
1500*	1500*	3/64	.041	H23HH19DCML
1000*	500	1/16	.065	H23JJ19DCML
300	100	3/32	.100	H23KK19DCML

* FKM seals not recommended for pressure above 500 psi.

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. for examples: valve (H23JJ19DCV 120/60) repair pack (KH23JJ AC)

Operating Conditions:

Media: Air and other non-corrosive gasses, water and oil.
Filtration: Down to 60 microns or less is recommended.
Valve Temperature Range:
- Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media
- Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*
Maximum Operating Pressure Differentials: See table above.
Burst Pressure: 10,000 PSI
Leakage: Bubbletight (with polymer sealing pins)

Electrical Characteristics:

Coil Voltage: 12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.
Nominal Power: AC — 7.3 Watts DC — 9.5 Watts (Per Operator)
Coil Construction: Molded (Std.) and Potted Class F or Class H (Opt.)
Typical Response Time on Air: 4 – 16 Milliseconds
Operating Speed: Up to 600 CPM
Duty Cycle: Continuous

Mechanical Characteristics

Body: 300 Series Stainless Steel
Internal Components: Stainless Steel. Copper – AC Only.
Elastomers: Nitrile (Buna) (Std.). Many other elastomers available.*
Sealing Pin: Kel-F (Std.)
Orifice Diameter: See table above.
Porting: 1/4″ NPT
Housing: Grommet and 1/2″ NPT conduit
Mounting: Must be mounted within 30° of vertical.
Life Expectancy: Millions of cycles, depending on application, lubrication, etc.
Valve Weight: 3.63 lbs
Repair Packs: See table above.
Options: Alternate Sealing Pin Materials and Alternate Elastomers*