Peter Paul High Pressure Valve Model H21

PeterPaul single orifice valves feature an orifice that is closed in the energized position, preventing any flow between the inlet and outlet ports. This valve uses a pin-style seal, with the pin guided into the orifice, making it suitable for use with air, other non-corrosive gases, water, and oil.

Kel-F pin sealing element.
Orifice guides the sealing pin for perfect alignment.
Simple construction…only three moving parts.

Attachments

Available on backorder

Request quotation and delivery time

Description
Additional information

MAX. OPER. PRESS. DIFF.	ORIFICE SIZE	CV FACTOR		VALVE NUMBER
			GROMMET HOUSING		CONDUIT HOUSING
			1/8″ NPT PORTS	1/4″ NPT PORTS	1/8″ NPT PORTS	1/4″ NPT PORTS
2000*	.6mm	.010	H21M7XGM	H21M9ZGM	H21M7XCM	H21M9ZCM

* FKM seals not recommended for pressure above 500 psi.

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. for examples: valve (H21M7XGV 120/60) repair pack (KH21MX AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (OH21MDDGV 120/60)

Operating Conditions:

Media: Air and other non-corrosive gasses, water and oil.
Valve Temperature Range:
- Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media.
- Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*
Maximum Operating Pressure Differentials: See table above.
Burst Pressure: 10,000 PSI
Leakage: Bubble tight for standard valves.

Electrical Characteristics:

Coil Voltage: 12, 24/DC
Nominal Power: DC — 9.5 Watts
Coil Construction: Molded (Std.), Non-molded Class A and Potted Class F or Class H (Opt.)
Typical Response Time on Air: 4 – 16 Milliseconds
Operating Speed: Up to 600 CPM
Duty Cycle: Continuous

Mechanical Characteristics

Body: Stainless Steel
Internal Components: Stainless Steel.
Elastomers: Nitrile (Buna) (Std.). Many other elastomers available.*
Sealing Pin: Kel-F (Std.)
Orifice Diameter: See table above.
Porting: 1/8″ NPT and 1/4″ NPT (other ports available).
Housing: Grommet and 1/2″ NPT conduit
Life Expectancy: Millions of cycles, depending on application, lubrication, etc.
Valve Weight: 1.19 lbs
Repair Packs: See table above.
Options: Alternate Elastomers, Alternate Sealing Pin Materials, Spade Terminal Coil, and European Style DIN*