Peter Paul Hazardous Location Valve with Piped Exhaust Model SLW53

General purpose valves for pneumatic and hydraulic applications. The versatility of these valves is increased to include the handling of hot air, hot water, refrigerants and many other media, by the use of different seals. Air and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, oils, some hydraulic fluids, and many media require special seal materials. • General purpose valve with reduced power consumption. • Increased versatility. • For pneumatic and hydraulic application. • NEMA 4 rating is standard with encapsulated coil. • High quality engineering.

Attachments

Available on backorder

Request quotation and delivery time

Description
Additional information

MAX. OPER. PRESS. DIFF.				ORIFICE SIZE		CV FACTOR		VALVE NUMBER
GAS		LIQUID
AC	DC	AC	DC	N.C.	N.O.	N.C.	N.O.
215	135	215	135	1/32	1/32	.022	.020	SLW53GG8XCCP
215	120	120	65	1/32	3/64	.022	.048	SLW53GH8XCCP
135	50	40	30	1/32	1/16	.022	.075	SLW53GJ8XCCP
70	35	30	20	1/32	1/16	.022	.134	SLW53GV8XCCP
55	30	25	15	1/32	3/32	.022	.150	SLW53GK8XCCP
120	70	120	65	3/64	3/64	.055	.048	SLW53HH8XCCP
120	50	40	30	3/64	1/16	.055	.075	SLW53HJ8XCCP
70	35	30	20	3/64	1/16	.055	.134	SLW53HV8XCCP
55	30	25	15	3/64	3/32	.055	.150	SLW53HK8xCCP
85	40	40	30	1/16	1/16	.075	.075	SLW53JJ8xCCP
70	35	30	20	1/16	1/16	.075	.134	SLW53JV8XCCP
55	30	25	15	1/16	3/32	.075	.150	SLW53JK8XCCP
50	30	30	20	5/64	1/16	.134	.134	SLW53VV8XCCP
50	30	25	15	5/64	3/32	.134	.150	SLW53VK8XCCP
35	20	25	15	5/64	3/32	.156	.150	SLW53KK8XCCP

Operating Conditions:

Media: Air and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, oils, some hydraulic fluids, and many media require special seal materials. (Series 50 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range: Standard Valves – 0°F (-18°C) to 140°F (60°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials: See table above.

Burst Pressure: 5000 PSI

Leakage: Bubble tight for standard valves.

Vacuum: To 5 Microns*

Electrical Characteristics:

Coil Voltage: 12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power: AC — 1.8 Watts DC — 1.8 Watts

Coil Construction: Encapsulated Class F Coil with third wire ground

Typical Response Time on Air: 4 – 16 Milliseconds

Operating Speed: Up to 600 CPM

Duty Cycle: Continuous

Mechanical Characteristics:

Body: Stainless Steel (Std.) or Brass (Opt.)

Internal Components: Stainless Steel. Copper – AC Only.

Elastomers: Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter: See table above.

Porting: 1/8″ NPT (Std.)

Life Expectancy: Millions of cycles, depending on application, lubrication, etc.

Valve Weight: 0.60 lbs

Repair Packs: See table above.

Options: Alternate Port Locations, Metering and Alternate Elastomers*

Weight	1.5 kg
Pressure	5000 PSI
Flow	.022 – .156 CV
Wattage	1.8W
SPECIAL NOTE	Valves are UL listed and CSA certified for Hazardous Locations — Class I, Div 1, Group C and D – Class II, Div 1, Groups E, F, and G; Div 2, Groups A, B, C, D, E, F, and G