Peter Paul Hazardous Location Valve Model N73 with Piped Exhaust

Contact us to get your personalized offer

Hazardous Location — 3-Way Normally Closed Piped Exhaust
The N70 line Peter Paul Hazardous location valves are UL listed and certified for non-incendive hazardous location Class 1, Div 2, Groups A, B, C and D; Class 2, Div 2, Groups E, F and G; T3C temperature rating.

  • Largest direct acting (non-piloted) valve we manufacture.
  • Large orifice.
  • High flow.
  • Will operate effectively at very low pressures or vacuum.

Available on backorder

Description

+ MAX. OPER.
PRESS. DIFF.
ORIFICE SIZECV FACTORVALVE NUMBER
CONDUIT HOUSING
ACDCINLETEXHINLETEXH1/4 NPT PORTS
3503501/161/16.09.09N73JJ9ZCP-∆
2502503/323/32.22.22N73KK9ZCP-∆
1751751/81/8.35.35N73NN9ZCP-∆
1251255/325/32.45.45N73OO9ZCP-∆
1001003/163/16.50.50N73PP9ZCP-∆
50501/43/16.78.50N73RP9ZCP-∆

 

Ordering Information:

Seal Material:  Replace ∆ with desired code  –  Blank = Nitrile (Buna)      S = Low Temp Buna.      N = FKM*      E = Neoprene    A = EPDM

When ordering valves or repair packs add voltage and frequency to complete valve number. for examples: valve (N73OO9ZCP 120/60) repair pack (KN73OOX AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (ON73OODDCP 120/60)

 

Operating Conditions:

  • Media: Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials. (Series 70 pressure ratings may change due to the viscosity of the liquid.)*
  • Valve Temperature Range:
    • Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media.
    • Optional Valves – can tolerate much higher or much lower ambient and media temperatures.
  • Maximum Operating Pressure Differentials: See table above.
  • Burst Pressure: 4,000 PSI
  • Leakage: Bubble tight for standard valves.
  • Vacuum: To 5 Microns*

 

Electrical Characteristics:

  • Coil Voltage: 12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.
  • Nominal Power: AC — 18.0 Watts DC — 16.0 Watts
  • Coil Construction: Potted Class F. (Class H optional)
  • Typical Response Time on Air: 4 – 16 Milliseconds
  • Operating Speed: Up to 600 CPM
  • Duty Cycle:  Continuous

 

Mechanical Characteristics

  • Body: Stainless Steel (Std.) or Brass (Opt.)
  • Internal Components: Stainless Steel. Copper – AC Only.
  • Elastomers: Nitrile (Buna) (Std.). Many other elastomers available.*
  • Orifice Diameter: See table above.
  • Porting: Standard 1/4″ NPT (other ports available).*
  • Housing: Flame-Proof construction with 1/2″ NPT conduit
  • Listings: Listed and Certified for Non-Incendive Hazardous Locations Class 1, Div 2, Groups A, B, C and D; Class 2, Div 2, Groups E, F and G; T3C Temperature rating.*
  • Life Expectancy: Millions of cycles, depending on application, lubrication, etc.
  • Valve Weight: Conduit Valve: 2.06 lb
  • Repair Packs: See table above.
  • Options: Alternate Port Locations, Metering and Alternate Elastomers * Consult representative or factory for options and specifications.

* Consult us for options and specifications

Additional information

Weight1.5 kg
Type

Orifice/Port Size

1/4" NPT

Pressure

0 – 350 PSI

Flow

.09 – .78 CV

SPECIAL NOTE

Listed and Certified for Non-Incendive Hazardous Locations Class 1, Div 2, Groups A, B, C and D; Class 2, Div 2, Groups E, F and G; T3C Temperature rating.