Peter Paul Hazardous Location Valve Model E828 C/I

Contact us to get your personalized offer

We offer a line of Hazardous Location rated, large orifice Automatic Safety Shut Off Valves designed specifically for gas appliances. These valves meet the standards for Commercial/Industrial (C/I) Safety Shut Off Valves per ANSI Z21.21 (CSA 6.5). They are well suited for use in heating equipment, furnaces, ovens, kilns, boilers and gas generators.

  • Large orifice sizes for high capacity.
  • Body is made of 316 stainless steel.
  • Potted coil for outdoor service.
  • Pilot operated.
  • Voltages: 120/60, 12/DC and 24/DC
  • Power Input: 1.8 watts
  • Rated for ambient temperatures of -40°C to +65°C
  • NPT threaded connections.

Available on backorder

Description

MAX. OPER.
PRESS. DIFF.
MIN. OPER.
PRESS. DIFF.
GAS CAPACITY
BTU/Hr.
N.C.
ORIFICE SIZECV FACTORVALVE NUMBER
ACDC
303037,575,00013.01 NPTE828D23DCCP-S

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. for examples: valve (828B12DGM 120/60) repair pack (K828B12DD AC)

No operator available

Operating Conditions:

  • Media: Fuel Gas
  • Valve Temperature Range: – 40°F (-40°C) to 150°F (65°C) ambient and media.
  • Maximum Operating Pressure Differentials: See table above.
  • Leakage: Bubble tight

 

Electrical Characteristics:

  • Coil Voltage: 120/60 and 12, 24/DC
  • Nominal Power: 1.8 Watts
  • Coil Construction: Potted Class F
  • Operating Speed: Up to 100 CPM
  • Duty Cycle:  Continuous

 

Mechanical Characteristics

  • Body: 316 Stainless Steel
  • Internal Components: Stainless Steel. Copper – AC Only.
  • Elastomers: Nitrile (Buna)
  • Orifice Diameter: See table above.
  • Porting: 1/2″ NPT conduit
  • Listings: Valves are UL listed and CSA certified for Hazardous Locations — Class I, Div 1, Group C and D – Class II, Div 1, Groups E, F, and G; Div 2, Groups C, D, E, F, and G
  • Life Expectancy: Millions of cycles, depending on application, lubrication, etc.
  • Repair Packs: See table above.

Additional information

Weight1.5 kg
Type

Orifice/Port Size

1" NPT

Pressure

3 – 30 PSI

Flow

5.8 – 13.0 CV

SPECIAL NOTE

Valves are UL listed and CSA certified for Hazardous Locations — Class I, Div 1, Group C and D – Class II, Div 1, Groups E, F, and G; Div 2, Groups A, B, C, D, E, F, and G