Peter Paul Hazardous Location Valve Model E22 C/I

Contact us to get your personalized offer

PeterPaul single orifice valves have an orifice that remains closed in the de-energized position, preventing any flow between the inlet and outlet ports. We also offer a line of Hazardous Location rated, Automatic Safety Shut Off Valves specifically designed for gas appliances. These valves meet the ANSI Z21.21 (CSA 6.5) standards for Commercial/Industrial (C/I) Safety Shut Off Valves and are ideal for use in heating equipment, furnaces, ovens, kilns, boilers, and gas generators.

  • Explosion Proof
  • Potted coil for outdoor service.
  • Direct lift.
  • Voltages: 120/60, 12/DC and 24/DC
  • Rated for ambient temperatures of -40°C to +65°C
  • 1/4 NPT threaded connections
  • Heavy duty and made of stainless steel.
  • 36” lead wires

Available on backorder

Description

MAX. OPER. PRESS. DIFF.GAS CAPACITY
BTU/Hr
CV FACTORPIPE SIZEVALVE NUMBER
ACDC
50400,0000.4041/4 NPTE22Z0196YCCP 24/DC
50400,0000.4041/4 NPTE22Z0197YCCP 120/60
50400,0000.4041/4 NPTE22Z0198YCCP 12/DC

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. for example: repair pack (2KE22Z0196-DC for DC voltages; 2KE22Z0197-AC for AC voltages)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (OE22Z0196DCC 120/60)

 

Operating Conditions:

  • Media: Fuel Gas
  • Valve Temperature Range: -40°C to 100°C
  • Maximum Operating Pressure Differentials: See table above.
  • Burst Pressure: 5000 PSI
  • Leakage: Bubble tight for standard valves.
  • Vacuum: To 5 Microns*

 

Electrical Characteristics:

  • Coil Voltage: 120/60 and 12, 24/DC
  • Nominal Power: AC — 7.3 Watts DC — 9.5 Watts
  • Coil Construction: Class F with 36” leads and third wire ground, Potted
  • Typical Response Time on Air:  4 – 16 Milliseconds
  • Operating Speed:  Up to 600 CPM
  • Duty Cycle:  Continuous

 

Mechanical Characteristics

  • Body: Stainless Steel
  • Internal Components: Stainless Steel. Copper – AC Only.
  • Elastomers: Dynamic seal: low temperature Buna. Static seal: Buna
  • Orifice Diameter: See table above.
  • Porting: Standard 1/4″ NPT
  • Housing: Flame-Proof construction with 1/2″ NPT conduit
  • Listing: C/I Rated – Certificate Number 2248838
  • Life Expectancy: Millions of cycles, depending on application, lubrication, etc.
  • Valve Weight: 1.38 lbs
  • Repair Packs: See table above.

Additional information

Weight1.5 kg
Type

Orifice/Port Size

1/4" NPT

Pressure

0 – 50 PSI

Flow

0.404 CV

SPECIAL NOTE

This valve is C/I Rated – Certificate Number 2248838