Isov Remote Manual Valve N600-M

Remote Manual Valve N600-M: The Manual Pull Kit consists of a special Bracket plus internals to be mounted on the ISOV valve and connected by a Cable to the Control Panel Knob which is positioned inside the operators cabin.

This kit can be delivered in any length and the Manual Pull Kit can be equipped on all ISOV valves, regardless of ISOV bore size.

The Remote Manual Pull Configuration is usually found on mobile equipment, trucks, small welding machines, gen-sets etc.

ISOV emergency shutoff valves prevent enginge overspeeding by shutting off the air intake line.

Prior to starting the engine the manual ISOV emergency vave must be latched open by rotating the manual reset axis (1)

One latched the reset lever will remain in the latched open position untill released by pulling the manual trip handle(2).

The manual trip handle can be mounted directly on the valve (see figure 1) or mounted remotely using a special kit

which includes a pull cable, available in different lengths.

The manual pull handle can be equipped on all ISOV valves, regardless of size.