Hotstart Engine Heating System EVRHEAT-Series 20 EVR20-10191D11-N00

860.00 (excl. VAT)

EVR20 1900W 120V 110F 96CORD 5-20P NEMA PLUG

Hotstart’s EVRHEAT Series 20 heating system is a forced circulation coolant preheater, developed to maintain optimal temperatures for diesel and gas engines in industrial power generation applications.

Up to 45% more efficient than standard thermosiphon (TPS) heaters.

Hotstart SKU:12371 Category: Brand:

Available on backorder

Description

ENGINE READINESS AT A GLANCE
Indicator lights display current heater status, allowing users to verify heater operation at a glance. Engines are maintained at their optimized temperature range for easy starts with reduced emissions.

EASY TROUBLESHOOTING
If a fault condition arises, the heating system detects the problem and deactivates before any damage occurs – minimizing heater downtime, repair costs, and warranty expenditures. Clear fault indicators on the display inform users of heater status, making troubleshooting issues easier and quicker in the field.

QUICK RESPONSE CONTROLS
The EVRHEAT Series 20 uses solid state controls to respond to fluid temperature changes as little as 1 °F, resulting in increased temperature uniformity and eliminating nuisance low temperature alarms.

SIMPLIFIED INSTALLATION
Installation of the EVR20 is simplified with an adjustable 180° swivel inlet hose barb, accommodating plumbing requirements in confined areas and allowing for easier field retrofits.

       

LOWER TOTAL COST OF OWNERSHIP
The combination of the solid state temperature controls with its debris-resistant forced circulation pump makes for an exceptionally robust engine heating solution that is up to 45% more efficient than standard thermosiphon (TPS) heaters.

Efficiency & Performance

Efficiency is Everything. Engine heating provides essential benefits to organizations  that rely on onsite power generation. However, an inefficient heating solution can slowly sap away time and money – in the form of excessive electrical costs, frequent repair costs or replacement of hoses and plumbing.

View a case study comparing Hotstart EVRHEAT Series 20 to Hotstart TPS, CB, and CTM models.

 

Dimensions

     

Specifications

SYSTEM

  • Phase: Single-phase
  • Voltage: 120V | 280V | 240V
  • Ingress: IP66
  • Min./Max. Ambient Temp.: -31 – 113 °F (-35 – 45 °C)
  • Certification: UL C/US Listed CE / UKCA
  • Plug type: NEMA | Schuko | Uniterminated
  • Cord Length: 8ft. or 2.4m
  • Engine Displacement: Up to 20L

COOLANT

  • Fluid Type:  Water | Coolant mix (50% water/50% glycol)
  • Heat Power: 1.4 kW | 1.9 kW | 2.5 kW
  • Set Temp: 110 °F (43 °C)
  • High Limit Temp: 167 °F (75 °C)
  • Flow: 1.5 gpm @ 3.5 ft H2O (5.6781 L/min @ 1.067 m H2O)
  • Inlet/Outlet: 0.625” (16 mm) hose barb 0.625” (16 mm) hose barb

Note: Additional inlet/outlet hose barb sizes are available.

Installation

 

Additional information

Weight2.5 kg
Phase

Voltage

Wattage

Engine Displacement

up to 15 L (915 CID)

Cord Length

8in. (2.4 m)