5 Things to Check Before Selecting an ATEX Product
Dear Customer,
Every application in a hazardous area comes with its own operating conditions and equipment requirements. From the classification of the hazardous area to the conditions in which equipment will be installed and operated, these factors need to be considered when specifying ATEX equipment.
The right ATmosphères EXplosibles (ATEX) product begins with the right specifications. Before choosing a product, it is important to establish what the application requires and confirm that the equipment meets those requirements.
ATEX Products From SESCO
At SESCO, we offer ATEX equipment across different industrial requirements. Examples from our range include:
Built with a corrosion-resistant 2 mm (14 GA) steel cabinet, dual high-temperature limits, and a pressure relief device for added protection.
Designed for Zone 2 IIB T3 applications with a 1¼” NPT connection.
A coolant tank heater with a Y3 EP 30 RTD V-clamp configuration and thermostat for controlled fluid heating.
Designed for EP 25 applications, it helps maintain lube oil temperature to support reliable engine starting and reduce wear during cold starts.
Features a 1/32-inch orifice and a pressure rating of 300 PSI for precise flow control in industrial and medical applications.
Here are five key checks to consider during the selection process:
1. Hazardous Area Classification
First, identify the hazardous area in which the equipment will operate. Determine whether the risk involves flammable gases, vapors, or combustible dust, and establish the applicable Zone.
For gases, vapors, and mists, hazardous areas are classified as Zones 0, 1, or 2, while combustible-dust environments use Zones 20, 21, or 22. The selected equipment should have a classification appropriate for the specific hazardous atmosphere and installation.
2. ATEX Marking and Protection Requirements
Once the hazardous area is identified, review the equipment’s complete ATEX marking. This provides information about the equipment’s intended environment and protection characteristics.
Depending on the product, the marking may include the equipment group and category, gas or dust designation, protection concept, and temperature class.
- Category M1: Designed to remain functional in an explosive atmosphere, with very high protection.
- Category M2: Designed to be de-energised if an explosive atmosphere is detected.
- Category 1: Very high protection for areas where explosive atmospheres are present continuously, frequently, or for long periods.
- Category 2: High protection for areas where explosive atmospheres are likely to occur.
- Category 3: Normal protection for areas where explosive atmospheres are unlikely to occur and, if they do, are present only infrequently and briefly.
3. Application and Technical Requirements
ATEX compliance is only one part of product selection. The equipment must also perform its intended function within the system.
Consider requirements such as voltage, power, heating capacity, pressure, connection size, flow, mounting arrangement, or installation dimensions. A product can have appropriate hazardous-area certification but still be unsuitable if its technical specifications do not match the application.
4. Operating Conditions
Check the conditions in which the equipment will actually operate. Ambient and process temperatures, moisture, corrosive substances, and exposure to gases, vapours, or dust can all affect suitability.
The manufacturer’s specified operating limits should be reviewed alongside the conditions at the installation site, particularly for equipment operating continuously or in harsh industrial environments.
5. Documentation and Installation Requirements
Check the product documentation before finalising your selection. Installation instructions, operating limitations, and requirements for associated components or accessories should also be reviewed. This helps ensure that the selected equipment is installed and operated within its specified conditions.
Supporting Safer Industrial Operations With SESCO
ATEX plays an important role in industries where explosive atmospheres may be present, making the use of appropriately certified equipment an essential consideration for many industrial operations. Read the full ATEX guidelines here for more details.
Have an ATEX requirement or project to discuss? Contact SESCO and speak with our team about your needs.
Subscribe to our company update or follow us on LinkedIn to find out more about our new products in the upcoming months. Interested in our new product catalogue? Send us a message for more information!

